istme liigutamise sain maha
S nuppu mitte ei vajuta , vaid HOIAD ALL ja siis vajutad istme taha liigutamise nuppu.
Owners manual aitas

kui pult peaks kaduma minema, siis ostes ise uue puldi saab teda progeda nii:
1. Get in vehicle - close door. Use working FOB(remote) to UNLOCK all doors - press UNLOCK twice. It will also disarm the Vehicle Theft Security System (if you have one).
2. Insert key in ignition and turn to RUN position without starting the engine.
3. Using the FOB that works, press and hold the UNLOCK button down and count to 5 (say it out loud: 1-one thousand, 2-one thousand, 3-one thousand, 4-one thousand, 5-one thousand)
(Here's what they all left out)
4. While still holding the UNLOCK buttton down and before your count gets to 10-one thousand press and release the PANIC button and the UNLOCK button. You should hear a single chime or bing. That sounds means the Remote Keyless Entry Unit is set to receive the new vechilce access codes. I never heard the chime/bing I guess I was holding the buttons past 10 seconds.
5. Within 30 seconds of the chime/bing you must press any button on all of the FOB's including the one used to start this process. Basically you are clearing the memory of the RKEU (Remote Keyless Entry unit).You will hear a chime/bing after pressing a key on each FOB - this chime/bing signals that the code has been programmed into the Remote Keyless Entry Unit.
6. After the 30 seconds you will hear a chime/bing that means that you can no longer program any more FOBs. Or you could just turn the key to the OFF position.
Your done!!
7. Just a note that you will have to reprogram the first two FOBs for the Power Seat memory. The first two FOBs reprogrammed are the ones that will operate the memory seat and mirror system.