Chrysler Club Foorum http://chryslerclub.ee/foorum/ |
|
RIXCAR - car restoration workshop http://chryslerclub.ee/foorum/viewtopic.php?f=24&t=12780 |
Leht 1 koguhulgast 1 |
Autor: | RIXCAR [ Esmaspäev 20 Jaan, 2014 13:30 ] |
Teema pealkiri: | RIXCAR - car restoration workshop |
RIXCAR car restoration workshop is located in Riga - the capital of Latvia. The company has seven year experience in car restoration processes, at the moment there are 14 employees in RIXCAR and each of them is a master in his field. The main focus areas are: -car body repairs and painting -classic car restoration -exhaust system tuning Within the restoration process we use the highest quality environmentally friendly materials to ensure excellent results. The workshop is equipped with modern technologies which allows us to carry out custom projects of any difficulty, for example bending from scratch car body panel of any shape. We always give rough idea of the final price, after we see the condition of the car and we do everything we can to manage work processes smarter, to keep within the agreed price or decrease it by doing things differently and to be more innovative and creative so there would be less risks of unplanned expenses. We offer different kinds of ways to get everything done + we stand by our performance. We are able to provide numerous references from our customers from Nordic countries. We can also assist you with transporting your car to our workshop. Our projects can be seen here: http://www.facebook.com/rixcar http://www.rixcar.lv Contacts: Reinis Jansons Phone: +371 26414411 E-mail: reinis@rixcar.lv 1986 BMW M6 1953 Chevrolet Bel Air 1968 Chrysler Plymouth Barracuda 1968 Ford Shelby Studebaker Golden Hawk - 1957 Ford Thunderbird - 1960 Lincoln Continental Mk.IV - 1974 |
Autor: | RIXCAR [ Kolmapäev 05 Veebr, 2014 14:27 ] |
Teema pealkiri: | BWM M6 (e24) restoration |
RIXCAR car restoration workshop is located in Riga - the capital of Latvia. The company has seven year experience in car restoration processes, at the moment there are 14 employees in RIXCAR and each of them is a master in his field. The main focus areas are: -car body repairs and painting -classic car restoration -exhaust system tuning . This will be a little bigger poster from us, but it might be quite interesting reading material. So we have got a BMW M6 E24 here. Our aim was to restore the bodywork. The place where everything happened: RIXCAR So, when the car arrived, its condition was not very good. The body was damaged and there were a lot of rust. To start the restoration process, we removed all the lights, bumpers, etc. We cut out all the rusted parts and fitted the new ones. We welded all the places where it was necessary. Car's front corners after welding. The corner is hand made. The car is ready for painting Here we see the body after the primer base coat is applied. Body panels have been fitted to see if they match. There is a long story about the front fenders. Since it is close to impossible to find new fenders, we managed to get fenders made from fiber glass. During the time when the car and panels were prepared for painting, we fabricated brand new Magnaflow exhaust system. The car after painting process. After that we started to put the parts together: interior, overfenders, bumpers, body panels and many other parts. Then we drove the car outside to wash off all the dust. After a short while the coilovers arrived, special thanks to ADparts.eu. Then the windows were put back and we started fitting the coilovers. To put back the coilovers, steering knuckles had to be modified. The back of the car will be lowered more and the comfort springs will be removed. Moldings and bumpers were fitted. The car is getting back it’s original look. Our BMW M6 E24 is almost finished The rear bumper still needs to be adjusted. Lights and the whole car are not yet polished. The front chrome molding and fog lights will be fitted by the car owner himself. In these photos you can see the BBS RK 8,5j et15 wheels. The car is traveling back to Norway. Final pictures from harbour: The car has been returned to the owner, this project is finished. We hope that it was interesting to read and to see the pictures from the process. Our other projects can be seen here: http://www.facebook.com/rixcar http://www.rixcar.lv Contacts: Reinis Jansons Phone: +371 26414411 E-mail: reinis@rixcar.lv |
Autor: | RIXCAR [ Kolmapäev 17 Sept, 2014 10:14 ] |
Teema pealkiri: | Re: RIXCAR - car restoration workshop |
A new project from RIXCAR: Mercedes-Benz W123C restoration And the BMW E24 M6 video: https://www.youtube.com/watch?v=aorZ81Tbnfw |
Autor: | RIXCAR [ Esmaspäev 29 Sept, 2014 8:14 ] |
Teema pealkiri: | Re: RIXCAR - car restoration workshop |
Visit Riga. Visit RIXCAR. If you wish to see our workshop and the beauty of Riga city, check out our new video. |
Leht 1 koguhulgast 1 | Kõik kellaajad on UTC + 2 tundi [ DST ] |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |